Avid CNC  |  CNC Router Parts
What's New: Find us on FacebookYouTubeInstagram
Shopping Cart:
0 items

Standard CNC

Benchtop CNC

Plasma CNC



Other Products

Plans & Info

Tell A Friend
Tell someone you know about this product.
Plans & Info » Instructions & Configuration » PRO CNC Plasma Instructions
PRO CNC Plasma Instructions
PRO CNC Plasma Instructions

Our PRO CNC Plasma systems are currently compatible with Hypertherm 45XP, 65, 85, and 45 (discontinued) systems. These torches are available from a number of sources, although we recommend Baker's Gas if you are ready to purchase. To work with our torch mount, Ohmic touch-off and torch height control system, the Machine Torch, and CPC options are required. Shielded (Mechanized) Consumables are required for use with machine torch systems.

In order to work with the Ohmic touch-off feature that comes standard with our torch mounts, an ohmic retaining cap (sold separately) is required. Below are links to compatible configurations of Hypertherm torches and retaining caps.

Recommended Torches and Retaining Caps:
Plasma Setup
The following steps and downloads are required to set up plasma on your machine:
  1. Follow the instructions in our Getting Started Guide for mechanical setup and wiring of the plasma components.
  2. Follow the instructions in our Plasma Retrofit Guide to install your Torch Height Control card (not necessary if purchased with CNC Router Parts electronics).
  3. The Plasma Software Setup and Usage Guide contains instructions for using your PRO CNC Plasma systems with Mach4 CNC Control software and SheetCAM. This manual is also a helpful reference for plasma-specific software features like torch height control and anti-dive. For use with Mach3, refer to the note below.
Please Note
If you are using Mach3 CNC Control software with your PRO CNC Plasma system, refer to the Mach3 PRO CNC Plasma Instructions.