CNCRouterParts
Search:
What's New: RSS FeedFind us on FacebookYouTube
Shopping Cart:
0 items
PRO CNC

Standard CNC

Benchtop CNC

Plasma CNC

Electronics

Tooling

Other Products

Plans & Info

Tell A Friend
Tell someone you know about this product.
PRO CNC » PRO Rack and Pinion Parts » PRO Rack and Pinion Drive, NEMA 34
PRO Rack and Pinion Drive, NEMA 34
PRO Rack and Pinion Drive, NEMA 34
Our PRO series rack and pinion drives offer tighter interfaces and higher accuracy than our standard line, with the following features:
  • Ball bearing pivot interface.
  • Super-oilite bushing and matched precision ground spindle shaft.
  • High resolution 3.2:1 belt drive reduction for NEMA 34 motors motors.
  • Unique EZ-tension mechanism for simple adjustment of gear to rack pre-loading.
Our most recent version features some significant improvements in usability over previous models.
  • Top-side belt tensioning cam. Belt tension can be adjusted without clamps, even while the unit is installed on a machine.
  • Universal mounting plate design allows users to switch from NEMA 34 to NEMA 23 by changing only pulleys, belts, and drive spindle.
  • Dual bearing pivot with eccentric locking collar for low backlash and easy adjustment of rack engagement in non-standard setups.
Package includes:
  • Rack and Pinion drive plate with universal mounting features for NEMA 23 or NEMA 34 motors.
  • Pre-assembled dual bearing pivot system with precision shoulder bolt (3/8-16 thread).
  • 1/2” bore motor pulley.
  • Super oilite bearing drive spindle, with 20 tooth gear and 64 tooth timing pulley and matched precision ground shaft.
  • 5mm pitch timing belt.
  • Belt tension cam mechanism.
  • Motor mounting screws and nuts (motor not included).
  • Pro-tension kit.
PRO Rack and Pinion Drive, NEMA 34
Product Notes:
  • Motor not included.
  • Pair this drive system with our 960 oz-in NEMA 34 Motor for superior machine performance.
  • PRO R&P drives interface perfectly with our PRO Gear Rack, available in 39" or 52" sections that are conveniently spliceable for virtually unlimited travel, using 20 pitch, 20 degree pressure angle rack featuring a mounting flange for easier installation, greater stiffness, higher load capacity, and longer gear life.
PRO Rack and Pinion Drive, NEMA 34
Plans
Documentation
  • PRO Rack and Pinion Assembly Instructions
  • MACH Settings for R&P:
    The R&P system is based on a pinion with a 1" pitch circle. The total linear distance traveled per revolution of the pinion is thus 3.14159". With the 3.2:1 reduction, this means that the distance traveled per motor revolution is 3.14159 / 3.2, or 0.9817". If you have a stepper with 200 steps per revolution, this means you have 200 / 0.9817" = 203.718 steps per inch, or 0.004908" per step. With 10x microstepping , you would have 2037.18 steps per inch, or 0.0004908" per step.


$164.50
Currently Backordered.
Reviews


Customers who bought this product also purchased