PRO CNC Machine Kits
PRO CNC Accessories
PRO Rack and Pinion Parts
PRO Plates and Risers
PRO Ballscrew Components
Standard CNC Machine Kits
Standard CNC Accessories
Standard Rack and Pinion Parts
Standard Linear Motion
Acme Drive Parts
Standard Plates and Risers
Benchtop CNC Machine Kits
Benchtop CNC Accessories
PRO CNC Plasma
NEMA 23 CNC Electronics
NEMA 34 CNC Electronics
CNC Spindle / VFD
PRO CNC Rotary Axis
Router and Spindle Mounts
CNC Router Bits
Other Tooling / Accessories
CNC Kits and Parts Bundles
Fasteners and Brackets
Scratch & Dent
V-Con Linear Motion Parts
Plans & Info
Machine Plans & Assembly
Instructions & Configuration
Design and Make Project Series
Frequently Asked Questions
Tell A Friend
Tell someone you know about this product.
NEMA 23 CNC Electronics
Plug and Play NEMA 23 CNC Control System - CRP800-00E-5
Plug and Play NEMA 23 CNC Control System
Click to enlarge
Our pre-wired NEMA 23 electronics system offers a rugged, industrial control solution at an incredible value. This system features
stepper drivers, which provide significantly lower motor temperatures and motor noise, along with anti-resonance and ripple smoothing technology for exceptionally precise motion.
Professionally assembled and tested, this control unit is ready for plug and play operation. It is built in an industrial steel NEMA rated enclosure, complete with power entry connection, motor ports, powered industrial M12 signal ports, a remote e-stop, auxiliary AC outlets for router and dust collector, and a port for optional spindle control.
Package features include:
Industrial steel NEMA Enclosure
(4) All digital CRP5056 drivers, pre-wired to power terminals, motor plugs, and logic board, with support for an optional 5th motor driver.
IO breakout featuring a dedicated spindle relay and (2) 30A general purpose AC relays, (8) 12V powered M12 ports for homing/proximity sensors (or general input signals) (
sold separately), and on-board 0-10V analog output for spindle speed control.
600W 48V regulated power supply with plenty of power for 4 motors (an additional power supply is provided for the optional 5th motor driver configuration)
High quality 5V and 12V regulated power supplies for logic and sensor power.
(4) 5A rated plug and play motor terminals.
(4) Low inductance NEMA 23 motors with either a 1/4" or 3/8" shaft.
High flex / high current CNC motor cables
Available in various length configurations to fit your machine (choose Cable Configuration below).
Need longer cables? Our cables are designed to plug together, just order
as needed to get the length you need for your larger format machine.
2 AC power cables, one for the main control unit and one for auxiliary input power for a router or dust collector.
Plug-in E-Stop unit.
- included standard for expanded I/O, faster processing speed, and better comparability with modern computers/operating-systems!
that many large format CNC machines, including all of our
Standard Machine Kits
PRO Machines Kits
Benchtop Machine Kits
, employ a dual-drive gantry system, and thus require a 4-drive electronics package.
A 5th-Drive upgrade for this system is available to enable control of an additional independent axis (such as a rotary positioner, additional Z-axis, etc.). This upgrade contains an extra motor driver and all of the internal wiring to support a 5th motor, but does not include an additional motor or motor cable.
CNC Software Setup Guide
provides instructions for setting up your PC and the Mach3 controller software with this electronics system.
This system is ready for plug and play operation with Mach3 using our
Mach3 XML Configuration Files
Please choose from the available options and click Add to Cart
Additional Motor Drive:
None [4-Drive, Standard]
+1 [5th-Drive Upgrade] (+$150.00)
(4) 12' cables [recommended for Benchtop machines]
(1) 12' and (3) 20' cables [recommended for 4'x'2', 4'x4', or 5'x5' machines] (+$15.00)
(1) 20' and (3) 28' cables [recommended for 4'x8' or 5'x10' machines] (+$35.00)
(3) 12' and (1) 20' cable (+$5.00)
Motor Shaft Diameter:
3/8" (Low Inductance 420 oz-in)
1/4" (Standard 380 oz-in)
Current Reviews: 2
This product was added to our catalog on July 11, 2013.
Customers who bought this product also purchased
Pepperl + Fuchs Proximity Sensor (NBN8-12GM50-E0-V1)
PRO6060 5' x 5' CNC Router Kit
PRO60120 5' x 10' CNC Router Kit
Balanced ER20 Collet Nut
Bosch Colt Router Mount
Multi-Purpose Lithium Grease, 3 oz Cartridge
Create an Account
Copyright © 2019