CNCRouterParts
Search:
What's New: RSS FeedFind us on FacebookYouTube
Shopping Cart:
0 items
PRO CNC

Standard CNC

Benchtop CNC

Plasma CNC

Electronics

Tooling

Other Products

Plans & Info

Tell A Friend
Tell someone you know about this product.
Plans & Info » Design and Make Project Series » Make: Iris Skylight
Make: Iris Skylight
Make: Iris Skylight

Interested in making your own Mechanical Iris as seen in Make: Magazine's recent skylight project? We've partnered with Make: to bring you this project, and as we do with our other design & make projects, we have made the Fusion 360 design files available here.  This is an advanced fabrication project with a number of potential uses and ample opportunity for customization.  

 

In working with Caleb on this project, we produced two variations of this "pivot and slot" overlapping-leaf Iris design.  The first was made as a scale model prototype, called the 10" Benchtop Iris and the second is a full-size 26" Skylight Iris (the same as featured in the Made: Skylight project). Designed in Fusion 360, these designs include both the geometry, hardware, and CAM toolpaths that we used. Caution should be used when applying the toolpaths, while they worked for our fixturing and tooling - you should verify these before running on your machine.  

10 inch Iris Render  26 inch iris rendering

Assembly View

Both versions rely on the same basic architecture, a top cover that houses the motor and bearing ring, a lower fixed plate that provides the slots for the leaves to move in, a moving plate that the leaves pivot on, the bearing ring retains the moving plate to the top cover (allowing it to rotate but otherwise stay centered).   There are 12 iris leaves that attach to the moving plate pivot holes and the slots in the fixed plate. Smaller components like the drive gear (connects to the motor) and hardware to attach the top cover to the lower fixed plate (with spacers) finish the assembly.

Key Center on the CNC Machine

Note: The versions here use an NEMA 23 stepper motor, which requires electronics and programming know-how and the following major components.  Alternatively, a crank handle could be substituted for the motor drive with some customization. 

Electronics (advanced)

  • NEMA 23 Stepper Motor (420oz)
  • NEMA 23 Motor Cable
  • CRP5056 Stepper Driver
  • 48v Unregulated Power Supply
  • Arduino / Embedded Controller to generate STEP/DIR signals

 

Material Cut List

  • Benchtop 10" Iris
    1. (3) 24" x 24" x 1/2" HDPE, Plywood, or MDF (Fixed Plate, Top Cover, Bearing)
    2. (1) 24" x 24" x 3/4" HDPE, Plywood, or MDF (Moving Plate-Gear Ring)
    3. (1) 24" x 36" Plastic or Metal Sheet (Iris leaves)
  • Make: Skylight 26" Iris
    1. (3) 48" x 48" x 1/2" HDPE, Plywood, or MDF (Fixed Plate, Top Cover, Bearing)
    2. (1) 48" x 48" x 3/4" HDPE, Plywood, or MDF (Moving Plate-Gear Ring)
    3. (1) 48" x 96" Plastic or Metal Sheet (Iris leaves)

 

Source Files