Skip to content

Mach3 XML Files [Archived]

Please Note

These instructions are applicable for Mach3, our previous CNC control software. If you are setting up your CNC control PC with Mach4, please see our Mach4 CNC Software Setup Guide.

These XML configuration files provide an easy way to set up Mach3 to work with our various hardware and electronics packages.

While some tweaks may be required for your particular setup, these files will get you most of the way there. Any changes you make to the Mach setup can be saved to the XML file using the Config->Save Settings menu selection.

XML Configuration Files

The XML file you need is based on the following:

  1. The Model of your CNC Machine
    1. CRP - Standard CNC Machines
    2. PRO - PRO CNC Machines
    3. BTS - Benchtop Standard CNC Machines
    4. BTP - Benchtop PRO CNC Machines
  2. Electronics Version
    1. CRP800 - our Plug and Play NEMA 23 CNC Control System or Plug and Play NEMA 34 CNC Control System.
    2. CRP100 - DIY packages with our NEMA 23 motors and Leadshine MX3660, Leadshine MX4660, or Gecko G540 stepper drivers.
  3. Motor Type
    1. NEMA 34 motors with 1/2" shafts
    2. NEMA 23 motors with 3/8" shafts
    3. NEMA 23 motors with 1/4" shafts
    4. Note: For machines with NEMA 23 motors, our NEMA 23 Stepper Motors with 3/8" Shafts are standard and always recommended. Unless you specifically requested 1/4" shaft motors with your order, you should have 3/8" shaft motors.
  4. Cutting Tool
    1. Spindle
    2. Router
    3. Plasma

Important Notes

  • For custom CNC machine sizes, simply choose the configuration for the closest machine size available below and adjust the soft limit settings accordingly.
  • If you have and difficulty identifying your CNC Machine Model, Electronics version, Motor Type, or Cutting Tool, please Contact Us and we will be happy to help!
  • If you purchased a dual-purpose machine, you will need two configuration files, one for each cutting tool. For example, one for Spindle and one for Plasma (with all other machine details identical)
  • The default speeds in the configuration files we provide below are set to very conservative initial values. As you work and become more familiar with your CNC machine, you can adjust these settings to achieve the much faster rapid an cutting speeds that your machine is capable of achieving.

Please use the following filters to narrow the options to those applicable for your machine.

Model:  [?]
Machine Width:
Machine Length:
Electronics Version:  [?]
Motor Type:  [?]
Cutting Tool:
   
 



Mach3 Configuration Files - Current Revision 19.2.1
Model Description Electronics Version Motor Type Tool Download
PRO4824 4' x 2' PRO Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
PRO4824 4' x 2' PRO Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
PRO4824 4' x 2' PRO Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
PRO4848 4' x 4' PRO Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
PRO4848 4' x 4' PRO Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
PRO4896 4' x 8' PRO Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
PRO4896 4' x 8' PRO Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
PRO6060 5' x 5' PRO Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
PRO6060 5' x 5' PRO Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
PRO60120 5' x 10' PRO Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
PRO60120 5' x 10' PRO Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
CRP4824 4' x 2' Standard Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
CRP4824 4' x 2' Standard Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
CRP4848 4' x 4' Standard Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
CRP4848 4' x 4' Standard Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 23, 1/4" Shaft Router [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 23, 3/8" Shaft Router [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 34, 1/2" Shaft Router [XML]
CRP4896 4' x 8' Standard Series CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 23, 1/4" Shaft Router [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 23, 3/8" Shaft Router [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 34, 1/2" Shaft Router [XML]
CRP4896 4' x 8' Standard Series CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 23, 1/4" Shaft Router [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 23, 3/8" Shaft Router [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 34, 1/2" Shaft Router [XML]
BTP2424 2' x 2' Benchtop PRO CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 23, 1/4" Shaft Router [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 23, 3/8" Shaft Router [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 34, 1/2" Shaft Router [XML]
BTP2424 2' x 2' Benchtop PRO CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 23, 1/4" Shaft Router [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 23, 3/8" Shaft Router [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 34, 1/2" Shaft Router [XML]
BTP2436 2' x 3' Benchtop PRO CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 23, 1/4" Shaft Router [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 23, 3/8" Shaft Router [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 34, 1/2" Shaft Router [XML]
BTP2436 2' x 3' Benchtop PRO CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 23, 1/4" Shaft Router [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 23, 3/8" Shaft Router [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 34, 1/2" Shaft Router [XML]
BTS2424 2' x 2' Benchtop Standard CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 23, 1/4" Shaft Router [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 23, 3/8" Shaft Router [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 34, 1/2" Shaft Router [XML]
BTS2424 2' x 2' Benchtop Standard CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 23, 1/4" Shaft Plasma [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 23, 1/4" Shaft Router [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 23, 1/4" Shaft Spindle [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 23, 3/8" Shaft Plasma [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 23, 3/8" Shaft Router [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 23, 3/8" Shaft Spindle [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 34, 1/2" Shaft Plasma [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 34, 1/2" Shaft Router [XML]
BTS2436 2' x 3' Benchtop Standard CRP100 NEMA 34, 1/2" Shaft Spindle [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 23, 1/4" Shaft Plasma [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 23, 1/4" Shaft Router [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 23, 1/4" Shaft Spindle [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 23, 3/8" Shaft Plasma [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 23, 3/8" Shaft Router [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 23, 3/8" Shaft Spindle [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 34, 1/2" Shaft Plasma [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 34, 1/2" Shaft Router [XML]
BTS2436 2' x 3' Benchtop Standard CRP800 NEMA 34, 1/2" Shaft Spindle [XML]
Archived XML Configuration Files for Previous Machine Revisions
Machine Type Electronics Version Motor Type Download
Standard CNC (CRP) CRP100 NEMA 23, 1/4" Shaft [XML]
Standard CNC (CRP) CRP100 NEMA 23, 3/8" Shaft [XML]
Standard CNC (CRP) CRP500 NEMA 23, 1/4" Shaft [XML]
Standard CNC (CRP) CRP500 NEMA 23, 3/8" Shaft [XML]
Standard CNC (CRP) CRP300 NEMA 34 [XML]
PRO CNC (Rev 14.1) CRP100 NEMA 23, 1/4" Shaft [XML]
PRO CNC (Rev 14.1) CRP100 NEMA 23, 3/8" Shaft [XML]
PRO CNC (Rev 14.1) CRP500 NEMA 23, 1/4" Shaft [XML]
PRO CNC (Rev 14.1) CRP500 NEMA 23, 3/8" Shaft [XML]
PRO CNC (Rev 14.1) CRP300 NEMA 34 [XML]
Benchtop PRO (Rev 14.1) CRP500 NEMA 23 (1/4" or 3/8" Shaft) [XML]
Standard Series (CRP) CRP800 NEMA 23, 1/4" Shaft [XML-current]
[XML-revA] *
Standard Series (CRP) CRP800 NEMA 23, 3/8" Shaft [XML-current]
[XML-revA] *
Standard Series (CRP) CRP800 NEMA 34 [XML-current]
[XML-revA] *
PRO Series (Rev 14.1) CRP800 NEMA 23, 1/4" Shaft [XML-current]
[XML-revA] *
PRO Series (Rev 14.1) CRP800 NEMA 23, 3/8" Shaft [XML-current]
[XML-revA] *
PRO Series (Rev 14.1) CRP800 NEMA 34 [XML-current]
[XML-revA] *
Benchtop PRO (Rev 14.1) CRP800 NEMA 23 (1/4" or 3/8" Shaft) [XML-current]
[XML-revA] *
Benchtop Basic CRP700 NEMA 23 [XML]
2' x 2' Benchtop Standard (Rev 2016Q1) CRP800 NEMA 34, 1/2" Shaft [XML-current]
[XML-revA]*
2' x 2' Benchtop Standard (Rev 2016Q1) CRP800 NEMA 23, 3/8" Shaft [XML-current]
[XML-revA]*
2' x 2' Benchtop Standard (Rev 2016Q1) CRP800 NEMA 23, 1/4" Shaft [XML-current]
[XML-revA]*
2' x 2' Benchtop Standard (Rev 2016Q1) CRP100 NEMA 34, 1/2" Shaft [XML]
2' x 2' Benchtop Standard (Rev 2016Q1) CRP100 NEMA 23, 3/8" Shaft [XML]
2' x 2' Benchtop Standard (Rev 2016Q1) CRP100 NEMA 23, 1/4" Shaft [XML]

* For CRP800 electronics purchased before July 2015, you will need the "revA" version of the XML configuration, all newer systems will need the "current" version.

Our archived configuration files also include options with these older electronics systems:

  • CRP300 - DIY packages with our NEMA 34 motors, Gecko G201X or G203V drivers, and PMDX-126 breakout boards.
  • CRP500 - Older versions of our Plug and Play electronics systems built prior to February 2015, with our NEMA 23 motors paired with our CRP5042 digital drivers and breakout board, in the same NEMA enclosure as our current CRP800 systems.

Installation Instructions

Please Note

If you are running any of our electronics or systems with the Ethernet SmoothStepper and Mach3, please refer to the Mach3 CNC Software Setup Guide for installation and configuration instructions.

Install XML Configuration File

  1. Close Mach3 if it is currently running.
  2. Download and save/copy the XML configuration file(s) you require from the links in the table above into your Mach3 installation folder (default: C:\mach3)
    Copy XML configuration files
  3. Once copied, double-click the "Mach3 Loader" icon on your desktop.
    Open Mach3
  4. The new profile(s) will now appear in a list of selectable profiles. Highlight the profile you wish to use and hit "Ok" to load it.
    Select Mach3 profile
  5. When Mach3 loads, you should now see the profile name in the lower right hand corner of the screen in a box labeled "profile".
    Mach3 screen

Enable the Z Home / Z+ Limit Switch (if equipped)

Our current XML Configuration files are pre-configured for a Z Home / Z+ Limit, however the switch is disabled by default. To enable it:

  1. Open the Config Menu, select the "Ports and Pins" option, and navigate to the "Input Signals" tab.
    Mach3 Ports and Pins tab
  2. Check the "Enabled" setting for the "Z++" and "Z Home".
    Mach3 Z++ and Z Home enabled