We get a lot of requests for taller z axes on our machines. While we can do some things to get you a taller z, there are several things to consider before going this route.
We do not recommend using either hot rolled steel or aluminum with our linear motion systems. Both of these materials lack the tolerances and dimensional stability present in cold rolled steel, which... (view full topic)
We definitely do! We ship components and machine kits all over the world, and have multiple service offerings available for our international customers. We are also happy to work on custom shipping ... (view full topic)
This is a difficult question to answer with a single number, as the accuracy of a machine is dependent upon multiple factors, including the machine size and design, the components used, and the time a... (view full topic)
Welcome Joe's customers! For an R&P machine, you will want 3 of our rack and pinion drive systems. If you are building a standard hybrid machine, then you will need the 3/8" pivot option, as the ra... (view full topic)
The decision between NEMA 23 and NEMA 34 motors is primarily a decision about productivity -- NEMA 34 motors can remove material at a higher rate using higher feed rates and deeper cut depths.
Our Standard series machines make use of affordable components such as Acme lead screws and radial bearings to provide an exceptional value. Our PRO series machines feature higher-performance compone... (view full topic)
We get this question a lot: "Company XXX sells motors with a super high stall torque (oz-in) rating -- won't I get better performance from these higher torque motors"? The answer may surprise you!